Complete Hydroponic Grow Room Tent Fan Filter HPS Light Kit 250 600w 100x100x200. In this kit you will get. 1 x Light kit (reflector, light, bulb and ballast) - Please select Size. 4" Fan kit ST100 Fan, Carbon Filter 4". Power Plant timer - Please select if required.
YoYo - Please select if required. Please see below for description on products. The 250w or 600w Ballast, has been designed for improved quality and high output.
Fitted with IEC connector cord and UK mains lead. This produces the full light spectrum with added blue for the propagation and vegging stages. We recommend you replace lamps every 3-6 months to avoid diminishing harvests. Please keep the retail packaging in case you need to return it to us. Bulbs sent without the original packaging are not covered by warrant.
PowerPlant Heavy Duty Timer - Please select if needed. Normal household timers are not built to take the high inductive loads produced by HID ballasts. If used with an HID ballast - the contacts inside the timer that open and close the timed circuit will overheat and weld together - breaking the timer and leaving your grow lights permanently on.
The PowerPlant Heavy Duty Timer is different. It is designed to take high loads and has no problem dealing with the inductive loads produced by a 600w ballast. It has a 96 switching operations within a 24 hour period (every 15 minues). This timer is suitable for timing one 600w HID ballast. It has a robust case design with socket and timer dust/moisture covers.This unit is ideal for timing 400w and 600w ballasts. Do not use more than one 600w ballast per timer. FAN, ALUMINIUM DUCTING, CARBON FILTER, CLAMPS X 3. Centrifugal fan - 110 m3/h - comes with stand attached to screw to floor (can not see in picture). To get the most out of your kit, please follow these few tips. Remember, if you reverse-mount your Filter you will lose the benefit of your pre-filter and reduce the life of the carbon. Always mount your filter as high as possible. Hot air naturally rises and so will your odours!
Try not to block too much of the filter with mounting straps or hanging devices. Use the ends of the filter to support, so not to inhibit the surface area of the filter.Do Not mount your Filter near to humidifiers. Humid air over 85% may enter the filter rendering the activated carbon ineffective and your filter may NOT neutralise odours! Ensure you have an airtight seal around the connection of your filter to ducting or extractor fan. The item "Complete Hydroponic Grow Room Tent Fan Filter HPS Light Kit 250w 600w HPS 1x1x2m" is in sale since Friday, August 25, 2017. This item is in the category "Garden & Patio\Hydroponics\Complete Growing Kits". The seller is "hydroponics4less" and is located in Solihull. This item can be shipped worldwide.